Repair manual yashica electro 35 gx Pc#

The GX has very limited press, that trying to google any reviews would give just two or three articles in the interwebs. The price I got it for is so low, I might be murdered on the street by analogue camera enthusiasts and the condition it came in might cause a riot in the same crowd as well. The treasure hunt so far gave me this mint condition Yashica Electro 35 GX from the depths of the old camera piles. But when I do, there is this thrift shop that makes the 12-hour trip worth it. I rarely go to the City of Tabuk in Kalinga Province. In The Amazing Spider-Man (2012), Peter Parker is shown using a Yashica Electro 35 in the first half of the film.ItвЂ™s those rare finds, in the rarest of times that really make the best experiences. Like many older cameras, the original foam light seals around the film compartment will eventually break down and cause light leaks. However, a 6V alkaline battery ( PX28A or 4LR44) may be used, with a purchased adaptor. The Electro 35 was designed to operate using a 5.6V mercury battery but these have now been banned due to environmental concerns. The camera needs to be disassembled for this pad to be replaced. Over time this rubber degenerates and prevents proper (internal) operation of the camera, in particular its metering circuits. As the film-advance lever is operated, this slider shoots up to its original position, hitting a small rubber pad at the top.

Part of the internal mechanism involves a spring-loaded slider operating a set of switch points. However, there are a number of issues to look out for.ДЄ Mint Yashica Electro 35 'Pad of death' With proper care, an Electro 35 can still be used today.

Repair manual yashica electro 35 gx Pc#

The major change for these cameras was the addition of a hot shoe while keeping the PC socket. The Electro 35 GSN (satin chrome) and GTN (black) were introduced in 1973. The range of usable film speeds was doubled to range from 25 to 1000 ASA. They (and all later Electro 35 models) have all internal electrical contacts gold plated to prevent oxidation from impeding the flow of electricity around the circuits. The Electro 35 GS and GT were introduced in 1970. The Electro 35 GT was released in 1969 with a body painted black instead of the satin chrome finish. The lens was labelled a 'Color Yashinon' to reassure the buying public that it was colour corrected at a time when the use of colour film was growing quickly. The range of usable film speeds was extended a little up to 500 ASA. The Electro 35 G was introduced in 1968 with largely cosmetic changes. Without a battery to power the meter, the shutter defaults to its top speed of 1/500 second. The metering system can keep the shutter open for up to 30 seconds.

SLRs would wait many years for a similar capability with off-the-film metering. This system allows the shutter speed to be completely step-less and to adapt to changing light levels. The light metering electronics works by accumulating the measured light level and only releasing the shutter when it has determined enough light has fallen on the film. The film speed adjustment is not implemented electronically instead, a simple twin-bladed diaphragm closes in front of the light sensor as the film speed is reduced. Light levels are measured using a cadmium sulphide (CdS) photoresistor and powered by a mercury battery. It has a 'cold' accessory shoe and the meter accepted film speeds from 12 to 400 ASA. The original Electro 35 was introduced in 1966.